PADDLECLIP

Chair assembly:
First step: Take the items as shown in the photo below.

Second step: Assemble the back of the bench with the pieces and install 5 of the 9 straps of the same length on the bottom part, as shown in the photo.

Third step: Assemble the backrest and install the remaining 4 straps.

Fourth step: Install the corners of the backrest and the upper part using the five longest straps (note that one is longer than the others, intended for the center of the chair).

Fifth step: Cross the straps exactly as shown in the photo for maximum strength.

Sixth step: Install the plastic fasteners provided for this purpose and pass them around the lower bar, as shown in the photo below.

Seventh step: Tighten all the straps securely as shown in the photo below.

Assembly on paddle:

First step: Install the supports on the paddle. Take the bungee cord and adjust it to your paddle board (make sure not to tighten the bungees too much).

Second step: Attach the support fasteners as indicated in the reference photo below.

Third step: Install the chair on the paddle board.