Light Stick

Step one: Assemble all the pipes together.

Step two: Thread the lights and the elastic wire through the light pole as shown in the photo.

Step three: Put the excess LED strip back through the light pole as shown in the photo below (be sure to leave a good length outside, as shown in the photo).

Step four: Put the cover back on (note that it may not close completely due to the LED strip; the cover has been designed for this purpose).

Step five: Install the light pole on the support on the paddle as illustrated in the photo below.

Step six: Tighten the bungee cord and attach it to the support using the hook provided for this purpose (see the reference photo below). Please note that the system has been designed to facilitate transportation. If desired, you can glue the pieces together with any plastic glue (at your discretion).

Step 7: Install the light pole support on the paddleboard. (Take the bungee cord and adjust it to your paddleboard, making sure not to tighten the bungees too much.)