Step one: Assemble all the pipes together.

Step two: Thread the lights and the elastic wire through the light pole as shown in the photo.

Step three: Thread the excess of the LED strip back through the light pole as shown in the photo below (make sure to leave a good length on the outside, as shown in the photo).

Step four: Put the cover back in place (note that it might not close completely due to the LED strip; the cover was designed for this purpose).

Step five: Install the light pole onto the mount on the paddle as illustrated in the photo below.

Step six: Tighten the elastic cord and attach it to the mount using the hook provided for this purpose (see the reference photo below). Please note that the system was designed for easy transport. If you wish, you can glue the parts together with any plastic glue (at your discretion).

Step 7: Install the light pole mount on the paddle board. (Take the elastic cord and adjust it to your paddle board, making sure not to overtighten the elastic cords.)